Print this page

Approval Logos:  

CPC Electronic Actuated Positioning Pilot Control


The Cla-Val CPC Electronic Actuated Positioning Control regulates flow through Cla-Val Main Valves by changing valve position from full open to shut-off.  The CPC consists of electronic actuator and hydraulic pilot sub-assembly.  The CPC controls valve position by hydraulically limiting valve opening with hydraulically-assisted pilot modulating main valve.

The pilot sub-assembly has two calibrated orifices that are positioned proportional to valve position to vary Cla-Val basic valve control chamber operating pressure.  The CPC actuator creates slight changes in orifice position and in turn operating pressure hydraulically changes valve position.  The pilot sub-assembly requires very little torque and is virtually frictionless for long service life.  The actuator features high repeatable-accuracy brush-less motor technology and low energy consumption.  Precision, no-contact hall-effect internal position sensor assures durability. 
Typical Applications
The CPC Electronic Actuated Positioning Control is used with 138 Series Electronic Actuated Control Valves in high rise building chill water circulating system applications.  Building SCADA control systems often use multiple circulating system parameters to control valve position for optimizing water circulating system.
The 138 Series valve can also be used in large water transmission systems where several system parameters must be controlled by one valve.  SCADA system monitors various water distribution system parameters, such as downstream pressure, upstream pressure, tank level, time of day, flow rates in several zones, etc., and then remotely changes 138 Series valve position to meet several system requirements as all parameters continue changing.  
Price Each: Call for Price