Click here to see an overview of the latest Cla-Val Production Innovations
|
Accurate Flow Measurement: Cla-Val Model X144 e-FlowMeter™
|
 |
The Cla-Val Model X144 e-Flow Meter is a vortex shedding flow meter designed to be installed in the inlet tapping of a Cla-Val Automatic Control Valve to provide accurate flow data without the need for a separate inline meter. The IP 68 Submersible e-Flow Meter provides accuracy to within 2% of Full Scale and can be easily retrofitted to a Cla-Val Control Valve without removing the valve from the pipeline. Because the flow meter is integral to the valve, installation costs are minimal and start-up can be facilitated in a matter of minutes.
A typical installation would be in an underground vault or anywhere tracking flow data is desired. The X144 e-FlowMeter™ communicates via a 4-20mA signal and can be easily interfaced with a remote display or SCADA system.
|
Superior Control: Cla-Val Model 138-01 Position Control Valve
|
 |
- Can be used for any application requiring position control
- Ideal for modulating level control
- One valve can be used to control several parameters
- Easy integration with SCADA communications systems
- Operating parameters can be adjusted using free down-loadable software from www.cla-val.com
- Provides greater and more precise control than actuated ball or butterfly valves
- Use our ComparFlow® software to see the superior performance the 138 Series Electronic Position ControlValve can provide
|
Onsite Power Without Tying into the Grid: Cla-Val X143IP Intermediate Power Generator |
 |
The X143IP Intermediate Power Generator is a self-contained power generation system designed to be mounted on a Cla-Val Automatic Control Valve. The X143IP uses the pressure drop across the valve to produce up to 14 watts of power to run electronic equipment located at the valve site.
Product Features
- Designed to be installed within the pilot system of a Cla-Val Automatic Control Valve
- Factory installed or field retrofittable to an existing valve
- Up to 14 watts continuous draw
- Up to 42 watts non-continuous draw
- 12 psi differential pressure minimum, 15 gpm
- 12 Volt Battery with 12 and/or 24 VDC Output
- Applications include powering electronic valve controls, data loggers, position controls and communications equipment
|
